Safety procedures for CNC machine tools
Source： Shenzhen Huartuo Technology Co., LtdPopularity：777Published：2017-07-19 14:18:21【SML】
Source: Shenzhen Waldorf Carbon Technology Co., Ltd. Popularity: 4 Published: 2017-06-20 17:07:45 【Small and medium-sized】
1 Turn on the main power switch, turn on the start button;
2 operation instruction machine coordinate system zero reset;
3 parts on the machine in the number of points;
4 processing start special attention to observe the Z axis relative to the coordinates of the value, to prevent the collision;
5 encounter an emergency, the first time press the "STOP" key;
6 work during the ban on slippers to work, to prevent the workpiece, tools fall to the foot;
7 need to check the knife when the knife has been tightened to prevent the head flying out of the wounds;
8 operation of the machine, you must close the door, before starting the machine tool to prevent debris, the workpiece, the tool flying out of the wounds;
9 When the machine spindle rotates, it is forbidden to touch by hand to prevent injury to the hand;
10 encountered processing accident, in time press "STOP" key to prevent serious problems and the second problem occurred;
11 Do not wear gloves to operate the machine panel; you must wear gloves to remove the workpiece!
Consult
13823305398
